So far I’ve tested many models from Enermax and all of them are made to work as CPU cooler or case fans and all of them had something unique to offer.
In August this year I tested Enermax T.B. Apollish 140 with red backlight and I believe now is the time to check its smaller brother from the series, namely Enermax T.B. Apollish 120mm with blue backlight.
Let’s check if this one is worthy to be in the Enermax product line.
As you can see from the picture above, the fan arrived in a transparent plastic box, which is actually pretty standard package type for newer models from Enermax. And yes, it is possible to see the fan through the front part of the plastic box, while the additional accessories are hidden behind the carton above the fan inside the box.
Of course on the front side of the package there are a few details for the product, while on the back side of the box are the full technical details related to the product.
Now let’s check the fan itself:
After I took the fan out of the package the first thing I noticed was the semi-transparent 120x25mm black square frame and a semi-transparent painted in light blue propeller with 7 blades, offering a very well-known feature: 2/3 of each blade is semi-transparent painted in light blue, while the other part has a reflective surface similar to mirror made to reflect the light from the LEDs installed as a LED stripe inside the frame with light blue LEDs.
The fan is powered and regulated by quite a long cable with a 3 Pin connector as every other case fan from Enermax I’ve tested so far. Unfortunately, this model is without sleeving on the cable, too.
The standard packge for this product offers:
- 4 metal screws
- 3:4-Pin power adapter
Now let’s do some testing:
The tests will be conducted in my standard way. I will mount the fan and test it at 5V/7V/9V/12V and my goal will be to check the performance of the fan in real conditions. The products will be tested under close-to-perfect conditions, not taking into account any external factors. The results achieved during the test can in no way be the same if the fan is mounted on a cooler or on the case fan hole of any modern computer case. I will measure the amount of air going through the fan for one hour and its speed. For this I use a fan controller, a voltage meter, an anemometer and a stand made specifically for this purpose.
And this is how the fan looks like installed on my test stand:
The test results are shown in the following charts:
Airflow through the fan at 5V, 7V, 9V, 12V.
Propeller rpm during the tests at 5V, 7V, 9V, 12V.
The anemometer showed the following air speed passing through the fan:
After mounting the fan onto the stand and leaving it to run for about 30 minutes at maximum speed, it was time for the tests to begin.
As with my other tests, again I started with a gradual increase of the voltage through the Lamptron FCT starting at 0V and the LEDs of the model started at about 7.5V while the propeller made one full revolution at 12V. So, to do the first test I had to decrease the voltage to 5V.
Test at 5V:
After I decreased the voltage to 5V and left the fan to rotate a bit at this operating voltage I measured the airflow level of 24 cubic metres per hour at only 400 revolutions per minute. Of course, at these revolutions per minute the fan was absolutely silent.
Test at 7V:
During the second test the fan was still completely silent working at 560 revolutions per minute and providing airflow level of 36.96 cubic metres per hour.
Test at 9V.
The third test was conducted at 9V and at this operating voltage the fan reached 49.92 cubic metres per hour at only 690 revolutions per minute. At this test the fan remained silent.
Test at 12V.
The last test conducted at 12V, which is actually the starting voltage for this product, made the fan work at maximum 900 revolutions per minute with maximum airflow level of 65.76 cubic metres per hour. Again, the fan was completely silent.
Conclusions:
- Performance: Enermax T.B. Apollish 120mm UCTA12N-BL is the typical fan made to provide or support the airflow inside every modern case with extremely low noise level and average airflow level. I can recommend it with hand on my heart for case fan but I can’t recommend it to be installed on CPU cooler, especially when cooling overclocked processor because of the low revolutions and static pressure.
- Noise level: I won’t talk about noise level. In fact the model was completely silent in all of the tests.
- Apperance: What can I say? Great visual effect. I can say unique! The light from the LEDs is very bright and stable when working at maximum operation voltage – 12V.
After I am done testing all I can say is: Perfect looking case fan model.
I think Enermax T.B. Apollish 120mm UCTA12N-BL deserves the following reward:
Enermax T.B. Apollish 120mm UCTA12N-BL has been added to the 140mm catalogue.
Official price (MSRP): unknown
warranty: unknown
I thank Enermax for the samples!












Hello and welcome to DVTests.com,
I am really happy to find out that my review was useful to you :).
Anyway very soon we will have a lot of reviews for the newer models recently announced from Enermax.
Stay tuned..
Best Regards
Thank you very much for the review! I’m going to buy one because of this review. 🙂