Scythe Glide Stream SY1425HB12L Test and Review

Scythe Glide Stream was introduced for the first time at September 2012 featuring seven different 120mm models made to cover the full range from silent to performance fans:

  1. SY1225HB12S – working at 600 rpm
  2. SY1225HB12L – working at 800 rpm
  3. SY1225HB12LM – working at 1000 rpm
  4. SY1225HB12M – working at 1200 rpm
  5. SY1225HB12SM – working at 1400 rpm
  6. SY1225HB12H – working at 1600 rpm
  7. SY1225HB12SH – working at 2000 rpm

Two days later the Glide Stream series was expanded with 4 new models with dimensions of 140mm again made to cover the full range from silent to performance fans:

  1. SY1425HB12L – working at 800 rpm
  2. SY1425HB12M – working at 1200 rpm
  3. SY1425HB12H – working at 1600 rpm
  4. SY1425HB12M-P – PWM controlled working in between 500 – 1300 rpm

For this article I am going to test and review SY1425HB12L, which is the slowest and most silent version of the 140mm models working at about 800 revolutions per minute, offering 49,95 CFM at only 21,4 dBA.

Now let’s get started…

IMG_7970

Scythe Glide Stream SY1425HB12L was provided to me in a transparent, not so big plastic, but still very tight box through which we can see part of the frame and the propeller structure, while the additional accessories and half of the fan are hidden behind a very colorful carton cover. On the front side of the package there is a lot of details related with the technologies used to create this product, while the full technical specification is on the back side of the carton cover.

IMG_7972

And this is how the fan looks out of it’s package:

IMG_7976

Scythe Glide Stream SY1425HB12L is made of a not standard square frame with dimensions of 140 x 140 x 25mm with a 120mm mounting holes and weight of maximum 134 grams painted in black matte. The interesting thing here is that the side of the frame is made as a ribbed part, made to boost the frame strength and the holes needed for the fan to be installed are with pre-installed rubber dumpers to reduce the noise and kill any vibrations.

IMG_7978

Apart from that, SY1425HB12L offers a propeller, again painted in black matte with 11 not very wide in surface blades with average angle, made to provide huge and steady airflow and static pressure. The blades themselves are supplied with special channels only on the top side, made to reduce the air resistance and focus the airflow behind the propeller.

IMG_7981

The connection between the frame and the propeller is done by sleeve bearing motor powered and regulated by a 500 mm sleeved in black mesh 3-pin cable and connector.

IMG_7985

Now let’s check the additional accessories provided with the fan:

  1. 4 metal screws for installing the fan on a 120mm case fan slot
  2. a 4-pin molex connector to 3-pin fan connector for powering the fan directly from the power supply.

I believe the moment to check how the fan performs has arrived.

The tests will be conducted in my standard way. I will mount the fan and test it at 5V/7V/9V/12V and my goal will be to check the performance of the fan in real conditions. The product will be tested under close-to-perfect conditions, not taking into account any external factors. The results achieved during the test can in no way be the same if the fan is mounted on a cooler or on the case fan hole of any modern computer case. I will measure the amount of air going through the fan for one hour and its speed. For this I use a fan controller, a voltage meter, an anemometer and a stand made specifically for this purpose.

And this is what the fan looks like installed on my test stand:

IMG_7990

The test results are shown in the following charts:

Airflow through the fan at 5V, 7V, 9V, 12V

Scythe Glide Stream SY1425HB12L A

Propeller rpm during the tests at 5V, 7V, 9V, 12V.

Scythe Glide Stream SY1425HB12L R

The anemometer showed the following air speed:

Scythe Glide Stream SY1425HB12L S

As always, after mounting the fan onto the stand and leaving it to run for about 30 minutes at maximum speed, it was time for the tests to begin.

As with my other tests, again I started with a gradual increase of the voltage through the Lamptron FCT starting at 0V and the Scythe Glide Stream SY1425HB12L  made one full revolution at 5.5V and to conduct the first test I had to decrease the voltage to 5V.

Test at 5V:

At the first test conducted at 5V the fan was completely silent, while rotating steadily at 435 revolutions per minute and offering airflow level of 43.2 cubic metres per hour.

Test at 7V:

At the second test conducted at 7V the fan remained completely silent, while rotating steadily at 555 revolutions per minute and offering airflow level of exactly 60 cubic metres per hour.

Test at 9V:

At the third test conducted at 9V the SY1425HB12L was providing airflow level of 72.96 cubic metres per hour at only 660 revolutions per minute. The fan was again completely silent.

Test at 12V:

The last test done at 12V revealed the full capabilities of the product, while rotating at 825 revolutions per minute providing airflow level of 90.24 cubic metres per hour. At this test there was a tiny noise coming out of the air passing through the propeller. This noise could not be heard from a distance of more than 100mm.

Conclusions:

Performance: After I am done testing all I can say is that Scythe Glide Stream SY1425HB12L is the perfect case fan with dimensions 140 x 25mm, made to be installed on a 120mm case fan slot, featuring rubber dumpers and a very long 3-pin power cable and connector. While operating, SY1425HB12L offers very steady and serious airflow level, at low to average revolutions per minute without any noise at all.

According to my test results I can recommend this model to be used as a case fan inside every modern case or mounted on a very big CPU cooler heat-sink installed on a processor working at default or a bit overclocked frequencies. Unfortunately, I can’t recommend it to be used for cooling high to extremely overclocked processors, since the static pressure level is not so high.  Of course, Scythe Glide Stream series offers 3 additional,  much more powerful models, which I am sure will handle cooling everything.

Appearance: Scythe Glide Stream SY1425HB12L is one really good looking model, offering very nice and stylish design and completely painted in black matte, which will stay neutral to every system or modding project.

 

I think Scythe Glide Stream SY1425HB12L deserves the following reward:

Best-Visual-silence

Scythe Glide Stream SY1425HB12L has been added to the 140mm catalogue.

Official price (MSRP): Scythe Glide Stream SY1425HB12L – 11.95 euro

Warranty: 24 months

 

I thank Scythe for the test sample.

scythe-simply-cool-468x60

4 thoughts on “Scythe Glide Stream SY1425HB12L Test and Review”

  1. Thank you for the test. But about a noise level, it would be IMHO more informative to provide digits in decibels. Anyway, I am glad to find your test: it is useful for me. So, thank you very much for the test and for your easy language: it is understandable for me, non-English reader.

    There in Saint Petersburg, Russia, I see SY1425HB12L at 430 roubles (about 8.9 euros), but with only 12 months of warranty.

Leave a Reply

Your email address will not be published. Required fields are marked *