Silverstone GD10

The GD10 chassis is constructed from 0.8mm steel, plastic and aluminium (used for the front panel door, that is lockable). Total weight of the case is 4.8 kg, slightly heavier than GD09. As for the physical dimensions of the case, they are 442mm (W) x 171mm (H) x 362mm (D) or 27.4 liters as Silverstone states. The case can accommodate a standard ATX PSU with dimensions of 220mm maximum, 180mm recommended length. Exterior-wise GD10 follows almost the same design patterns, including streamlined chassis, very clean looks and the front panel door is actually made of higher priced material. 

gd10 front panel

GD10’s interior is able to house 7+1 PCI expansion slots, one external 5.25″ drive bay (compatible with one 3.5” or two 2.5”) and two internal 3.5″ drive bays (one compatible with 2.5”) as well as one 2.5” slot, achievable by the multi-purpose drive bracket. Supported motherboards are SSI-CEB, ATX and Micro-ATX.

gd10 inside

As far as the cooling is concerned, GD10 has five available fan mounts (three fans are included) that range from 80mm up to 120mm:

  • Rear: 80mm fan slot
  • Side Right: two 120mm intake fans, 900rpm, 18dBA
  • Left: one 120mm fan, 900rpm, 18dBA, compatible with 80mm fan

For the mounted fans there are dust filters present, which is always a nice feature. On the top panel there is a vent opening, which allows most of the hot air generated by the GPU to be exhausted for better cooling. Front panel features two USB 3.0 ports and the audio jacks, all of which are hidden behind the front panel door. CPU cooler limitation is set to 138mm in height and the GPU maximum length is at 309mm.

Leave a Reply

Your email address will not be published. Required fields are marked *