Cooler Master Nepton 240M and 120XL

Beginning with the smaller version of both coolers in the face of Nepton 120XL we have a 120 mm water cooling radiator, with dimensions of 150 x 119 x 38 mm, made by aluminium and painted in black. What Cooler Master did with both models is to provide them with a custom made water block that features larger copper plate area and actually inside it there is a huge amount of heat dissipation potential, as the skived fin area in square mm is about 4.5 times larger than that of competitive AIO solutions.

13_bedf3a6430cf1e0b49c81b7aab0c004e_1413855399

Nepton 120XL and the bigger version 240M are featuring two 120mm fans out of the box to help dissipate heat from the radiator fins. Fans supplied are Silencio FP120, featuring 5 blades on the propeller and have standard fan frame size of 120 x 120 x 25 mm. Operating RPM are between 800~2400, controlled by Pulse Width Modulation (PWM). While rotating at these RPM the each fan can achieve airflow level of 28 – 128 m3/h with the impressive static air pressure of 0.48~4.8 mmH2O. Cooler Master states that the fan should have 160,000 hours of MTBF which means that it should take some time for the fan to stop working. Responsible for the longer lifespan is the bearing type – Loop Dynamic Bearing (LDB) as it has extra oil storage space.

Regarding the noise generated by these fans Cooler Master states that noise levels are between 6.5~27 dBA, where 27 dBA are audible at 2400 RPM.

1 (1)

Nepton 240M and 120XL are both featuring FEP tubing with improved durability and larger inner diameter to improve the overall water flow, thus increasing the cooling efficiency. In the end of the tubing lies the water pump with its impressive water flow level of 120 l/h and lower vibrations, allowing it to achieve around 70 000 hours of MTBF. Due to the lower vibration output the pump operates at a noise level of below 15 dBA, which is outstanding, as most of the times with AIO the most audible thing is the pump if the fans operate at low RPM levels. Again, the pump is exclusively Cooler Master designed so quality and longevity are definitely the main goals here.

1 (2)

As for the 240M radiator it has dimensions of 274 x 119 x 27 mm so you’ll need a bigger case to fit it, but yet again performance requirements will be very much dependent of the CPU that you’re using. The supplied fans, pump and tubing are the same as with Nepton 120XL.

Mounting system of both coolers is compatible with all modern sockets of Intel and AMD:

[wpsm_list type=”check”]

  • Intel LGA: 2011-3 / 2011 / 1366 / 1150 / 1156 / 1155 / 775
  • AMD Socket: FM2 / FM2+ / FM1 / AM3+ / AM3 / AM2+

[/wpsm_list]

Leave a Reply

Your email address will not be published. Required fields are marked *